EIBOS Oceanus, a 3 in 1 automation resin 3D printing object post-processing system, including washing, drying and curing functions.

The purpose of the Oceanus is to simplify the complex and toxic post-processing for resin 3D printing, in order to make resin 3D printing more easier, healthier and reliable.

Automatic Liquid System Design

The Oceanus is able to automatic filling and automatic drainage the Resin Cleaning Agents (Liquids). Custom designed High power pump is being used here in order to enables fast pumping and fast draining. 

• By using the Automatic Liquid System here, the need of touching the cleaning agents liquid or waste water will strongly decrease.
• When using Resin Cleaning Agents which have strong volatility as cleaning agent, this system is able to avoid volatilization, minimize odor as well as prevent polluting the working environment.
• The pump inside of the Oceanus is custom designed which is able to let those small particle residues pass through.
• In terms of material selection, from the pump to the tube, a high degree of resistance for Resin Cleaning Agents is required. 

Safety Design

• Both Circuits and touch panel boards in Oceanus are independently placed in specific areas where we designed not being connected with other areas.
• Oceanus uses a low-voltage DC power supply. In terms of power supply method, Oceanus uses a direct-connected power cord, which can effectively avoid sparks when plugged in, compared with using port connection.
• All of the electronic components used in Oceanus are selected after rigorous scrutiny and screening. Additionally, we have strict sealing treatment requirements for internal motors and capacitors.
• The cavity of the Oceanus is not fully enclosed (or Sealed) in order to prevent potential safety hazards during the unit’s operation.

• Oceanus is designed with working protection features. If open the top cover while the Oceanus is operating, the unit will automatically pause, and continue to work after the top cover is closed.

Filter and Valve Design

• Oceanus is equipped with filter screen structures and valve in several locations. These filters and valves can effectively prevent resin residue or other large particles from entering the pump body, which in order to ensure the normal operation of Oceanus under long-term work.

Spilling Prevent Design

In the design of Oceanus, a total of three liquid spill prevention designs are included.

• Water level sensor are included in the Oceanus which is able to automatically detected of water level. There are three different water level in total which is low, medium and high water level detection. The working of these sensors are depend on the settings.
• Moreover, there is an extra High liquid level Hall sensor, position at the top of the high water level sensor. If the liquid level is exceeded, it will stop and alarm immediately.
• Beside, a Physical sensor is being set at the top cover. Safe and reliable.

Memorize Previous Settings

• At the time when we programming the Oceanus, we have added the ’setting memory’ function into the program. Such a design can help the user to store the setting parameters of the last use, thereby helping the user to operate and use the Oceanus more simply.

Impeller
  Oceanus Vs Other wash-station

In the Oceanus, we are using our unique waterproof technology, equipped with the customized high torque motor. This gives the Oceanus more powerful stirring power. By using a high-torque stirring motor with custom designed impeller, instead of traditional magnet stirring, the powerful water flow create by high torque motor and designed Impeller can wash where the brush cannot reach as well as getting a cleaner and more detailed post-processing result.

Cleaning

Oceanus Vs Manually

Overall Functional

Oceanus VS Others